Your shopping cart is currently empty.
Radial Engineering Stagebug SB-6 Passive Stereo Line Isolator
SB6
In stock
South
5 in stock.
North
1 in stock.
Passive Stereo Line Isolator
The StageBug SB-6 is a two-channel passive audio isolator designed to accommodate both balanced and unbalanced signals and effectively eliminate noise when used with instruments, consumer electronics, or professional line-level devices.
SB-6 Features
- Isolator for balanced and unbalanced signals
- Eliminates hum and buzz caused by ground loops
- Exceptionally linear from 20Hz to 20kHz
- Automatically configures for hi-Z or lo-Z signal chains
Problem solver for stereo systems
The SB-6 helps remove noise from two channel audio systems, stereo guitar racks, and pedalboards. Two on-board isolation transformers provide a flat frequency response from 20Hz to 20kHz, while removing hum and buzz from ground loops. Dual ground lift switches help further reduce noise, and a -15dB pad allows you to handle high volume outputs without distortion. When using the SB-6 before a set of powered speakers or guitar amplifiers, a polarity reverse switch corrects frequency cancellation and ensures both speakers play back in phase with one another. The SB-6 is completely passive with no need for power, so it's easy to insert into any system to remove noise quickly.
LEFT PHASE
reverses the polarity on the left output to help phase-align stereo signals.
PAD
reduces the input sensitivity by 15dB for louder sources.
INPUT
1/4” balanced TRS or unbalanced input. The StageBug SB-6 will auto-configure depending on the jack that is used.
Using the SB-6 in a stereo setup
Isolate the output from a DJ Mixer to a power amp using the SB-6 to eliminate hum and buzz caused by ground loops. Either ¼" mono or TRS connectors may be used.
Using the SB-6 in a pro setup
When running multiple speakers, you can often encounter noise due to imperfect power systems and DC offsets. Use the SB-6 to isolate distant loudspeakers to solve the problem.
Using the SB-6 in a guitar rig
Eliminate noise in your guitar setup by isolating the guitar amp from other electronic devices. This SB-6 works great between your pedalboard or with your wireless system.
| Model: | SB6 |
| Manufacturer: | Radial Engineer |
